Il centro di lavorazione Longmen è utilizzato principalmente nei settori aeronautico, aerospaziale, automobilistico, militare, dell'energia, dell'informazione, degli stampi e in altri settori di lavorazione delle parti. È progettato per lavorare parti complesse di grandi e medie dimensioni di metalli neri e non ferrosi. Ha le caratteristiche di alta precisione, alta velocità, alta flessibilità e protezione ambientale. I suoi indicatori di prestazione e...
02
Dic
Dic
With the development of modern manufacturing technology, CNC machining equipment and its supporting CAM system have been widely used and developed. The machining tool path generated by CAM system (i.e. cutting mode) is the core to control the machining operation of the equipment. The cutting path is the motion path and direction of…
25
Nov
Nov
With the development of CNC machine tools in China, thread milling as a method of using CNC machine tools to process threads has gradually been accepted and loved by the majority of customers in China. Thread milling is accomplished by using the three-axis linkage function of NC machining center machine tool. The thread milling process…
CNC horizontal lathe in the process of processing, the surface of the workpiece may have a processing mark, this uniform mark is normal, but also the basis for the finish of the processing surface. But sometimes there will be another trace, that is, the linear cut into a ripple, can be formed on the cylindrical…
10
Nov
Nov
In order to improve the efficiency of NC lathe, in the actual production application, we must first understand it. The material, structural characteristics and tolerance requirements of the parts machined by NC lathe are found out by real analysis. Roughness, heat treatment and other technical conditions. Then according to the analysis results, choose a reasonable…
03
Nov
Nov
Definition Of X、Y、Z Axis： In order to determine the movement direction and movement distance of the machine tool, a coordinate system must be established on the machine tool to describe the relative position of the tool and the workpiece and its changing relationship. Extend the thumb, index finger and middle finger…
27
Ott
Ott
In base alla struttura, la segatrice si divide in segatrice a nastro orizzontale e segatrice a nastro verticale, mentre il tipo orizzontale si divide in segatrice a nastro a forbice, a doppia colonna e a colonna singola. In base all'utilizzo, si divide in tipo manuale (alimentazione manuale economica e taglio manuale...
13
Ott
Ott
The tool arrangement of the CNC machine tool of the dual-spindle lathe, turning and milling compound machine tool adopts a three-dimensional tool arrangement structure. Compared with the turret tool holder, the tool change time is short and the failure rate is low. To meet the needs of machining parts, install multiple types of…
08
Ott
Ott
VMC850 vertical machining center adopts a vertical frame layout, the column is fixed on the bed, the headstock moves up and down along the column (Z direction), the slide moves longitudinally along the bed (Y direction), and the worktable moves laterally along the slide (X direction) )Structure. The bed, worktable, sliding seat,…
23
Set
Set
Threads are continuous protrusions and grooves with the same cross-section and specified profile formed along the helix on the cylindrical or conical surface. In various mechanical products, parts with threads are widely used. It is mainly used as connecting parts, fastening parts, transmission parts and measuring parts, etc. Machining threads on a CNC lathe is…