CNC horizontal lathe in the process of processing, the surface of the workpiece may have a processing mark, this uniform mark is normal, but also the basis for the finish of the processing surface. But sometimes there will be another trace, that is, the linear cut into a ripple, can be formed on the cylindrical…
10
nov
nov
In order to improve the efficiency of NC lathe, in the actual production application, we must first understand it. The material, structural characteristics and tolerance requirements of the parts machined by NC lathe are found out by real analysis. Roughness, heat treatment and other technical conditions. Then according to the analysis results, choose a reasonable…
03
nov
nov
Definition Of X、Y、Z Axis： In order to determine the movement direction and movement distance of the machine tool, a coordinate system must be established on the machine tool to describe the relative position of the tool and the workpiece and its changing relationship. Extend the thumb, index finger and middle finger…
27
okt
okt
Volgens de structuur is de zaagmachine verdeeld in horizontale bandzaagmachine en verticale bandzaagmachine, en het horizontale type is verdeeld in schaartype, dubbele kolom en enkele kolomtype bandzaagmachine. Volgens het gebruik, is het verdeeld in handtype (economische hand het voeden en...
13
okt
okt
The tool arrangement of the CNC machine tool of the dual-spindle lathe, turning and milling compound machine tool adopts a three-dimensional tool arrangement structure. Compared with the turret tool holder, the tool change time is short and the failure rate is low. To meet the needs of machining parts, install multiple types of…
08
okt
okt
VMC850 vertical machining center adopts a vertical frame layout, the column is fixed on the bed, the headstock moves up and down along the column (Z direction), the slide moves longitudinally along the bed (Y direction), and the worktable moves laterally along the slide (X direction) )Structure. The bed, worktable, sliding seat,…
23
sep
sep
Threads are continuous protrusions and grooves with the same cross-section and specified profile formed along the helix on the cylindrical or conical surface. In various mechanical products, parts with threads are widely used. It is mainly used as connecting parts, fastening parts, transmission parts and measuring parts, etc. Machining threads on a CNC lathe is…
15
sep
sep
CNC freesmachines worden de laatste jaren veel gebruikt in de productie. Het is onvermijdelijk dat er tijdens het gebruik een abnormale bewerkingsnauwkeurigheid optreedt, die de bewerkingsnauwkeurigheid beïnvloedt. Er zijn vier redenen voor dit probleem: de systeemparameters zijn gewijzigd of veranderd; de positielus van de bewerkingsmachine is abnormaal; de motor draait abnormaal,...
02
sep
sep
Wat is een CNC draaibank? CNC-draaibanken worden veel gebruikt. Ze worden voornamelijk gebruikt voor het snijden van de binnenste en buitenste cilindrische oppervlakken van asonderdelen of schijfonderdelen, binnenste en buitenste conische oppervlakken van willekeurige conische hoeken, complexe roterende binnen- en buitenoppervlakken, cilinders, conische draden, enz. en kunnen groeven maken, boren, ruimen, ruimen en kotteren...
24
aug
aug
The line rail CNC lathe has the characteristics of high rigidity, high precision, high efficiency and low price. The overall structure of the bed is smooth in chip removal, compact in structure and beautiful in appearance. High-speed and accurate tool change can save processing time. It has various processing functions and is good at processing…