The line rail CNC lathe has the characteristics of high rigidity, high precision, high efficiency and low price. The overall structure of the bed is smooth in chip removal, compact in structure and beautiful in appearance. High-speed and accurate tool change can save processing time. It has various processing functions and is good at processing non-ferrous metals. It also performs better in processing various alloy steel and stainless steel parts. It is suitable for the processing of small precision parts. In order to ensure the machining accuracy of the machine tool, it is necessary to pay close attention to the installation environment of the machine tool.
1. Keep away from the source of the earthquake and avoid direct sunlight：
If there is a seismic source near the equipment installation site, anti-seismic trenches must be set up around the equipment. If the anti-vibration groove is not provided, it will directly affect the machining accuracy and stability, resulting in poor contact of electronic components, which in turn will cause machine failure.
2. The voltage and current of the power supply are controlled at the installation location：
There are many mechanical equipment in the workshop installed on the CNC lathe, and it is inevitable that there will be fluctuations in the power grid. Therefore, it is necessary to control the power supply and voltage within the allowable range of the equipment, and the power supply voltage must be kept stable so that the normal operation of the equipment will not be affected.
3. The ambient temperature is less than 30 degrees celsius:
There is no cooling machine and exhaust fan inside the CNC electric control box. Excessive temperature will reduce the life of system components and easily cause failure. The increase in temperature increases dust, which can lead to bonding and shorting of integrated circuit chips.
4. When using the CNC lathe, do not change the factory setting parameters of the control system at will：
Machine shop parameter setting When the user uses, the machine shop parameter setting cannot be changed arbitrarily, the factory parameters will directly affect the dynamic characteristics of the equipment components, and the gap compensation parameter index value can only be adjusted according to the actual situation. If you want to change machine shop parameter settings, you must notify the manufacturer and follow the manufacturer’s technician’s instructions to change the factory set parameters.
5. Do not replace machine tool accessories casually：
For the configuration of CNC lathe manufacturers, it is necessary to comprehensively consider the value pairing of each stage. Blind replacement will lead to mismatch of parameter values, which may seriously lead to accidents. The pressure of the three-jaw chuck, hydraulic turret, hydraulic lathe tool rest, and hydraulic cylinder should all be within a certain range and cannot be arbitrarily commissioned.
